Home
FAQ
Search
Memberlist
Usergroups
Register
Log inAbout using the XT25 tweeter
About using the XT25 tweeter
philipm on Tue Oct 27, 2009 11:46 pm
Hi, Would the Vifa XT25 tweeter work in the crossover design for the RBR?
philipm- Posts: 2
Join date: 2009-10-27 
Re: About using the XT25 tweeter
Clearwave on Wed Oct 28, 2009 6:46 am
Which XT25?
It's not likely because the sensitivities, FR, and Imp differ, which in turn requires a crossover revision.
If you are looking for a replacement for the RBR, I now have the C5 available and it is on special. It uses the Scan Speak HDS tweeter, which is a great driver.
Jed
It's not likely because the sensitivities, FR, and Imp differ, which in turn requires a crossover revision.
If you are looking for a replacement for the RBR, I now have the C5 available and it is on special. It uses the Scan Speak HDS tweeter, which is a great driver.
Jed
Clearwave- Posts: 303
Join date: 2008-11-30 -
about using the XT25 tweeter
philipm on Wed Oct 28, 2009 10:04 pm
Hi,
The tweeter I would like to know about is the Vifa XT25 TG30-04 link at http://www.madisound.com/catalog/product_info.php?products_id=1181
thank you
The tweeter I would like to know about is the Vifa XT25 TG30-04 link at http://www.madisound.com/catalog/product_info.php?products_id=1181
thank you
philipm- Posts: 2
Join date: 2009-10-27 -
Re: About using the XT25 tweeter
Clearwave on Wed Oct 28, 2009 11:46 pm
The sensitivities are not the same so the values would need to be changed. Not sure why you want to use the XT25 over the SB tweeter in the stock kit.
I don't like to accept any imperfections in my designs, so I would never use the crossover intended for a given set of drivers with a different set of drivers unless all the parameters are exactly the same, and with these drivers they clearly are not.
That said, I'd be happy to work on a new kit for you using the XT25 and 15W8530k-01 driver if you buy the drivers from me. Since I have the RBR box it wouldn't be hard for me to run a new set of measurements with the drivers in the box. Email me for details and pricing.
Jed
I don't like to accept any imperfections in my designs, so I would never use the crossover intended for a given set of drivers with a different set of drivers unless all the parameters are exactly the same, and with these drivers they clearly are not.
That said, I'd be happy to work on a new kit for you using the XT25 and 15W8530k-01 driver if you buy the drivers from me. Since I have the RBR box it wouldn't be hard for me to run a new set of measurements with the drivers in the box. Email me for details and pricing.
Jed
Clearwave- Posts: 303
Join date: 2008-11-30 -
Permissions of this forum:
You cannot reply to topics in this forum