http://clearwave.forumotion.net/dynamic-series-build-threads-f3/-t1.htm Wed, 18 Nov 2009 19:16:26 GMT 10 http://illiweb.com/fa/prosilver_grey/site_logo.gif http://clearwave.forumotion.net/dynamic-series-build-threads-f3/-t1.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-series-build-t57.htm Fast Cars Hi Jed, a few questions for you : Dynamic 1S; Should the back side of the front baffle (less the driver & port hole) be covered in 1/2 and or 3/4 sonic barrier or not at all? You to have to drill a hole through the bottom of the upper chamber (Mid-range) do you silicone the hole around the wire after?. The top chamber gets poly fill but not the bottom chamber, it that right? Dynamic 4T's; the 2nd chamber right behind the MTM chamber, gets sonic barrier also but no Poly fill but all ... Dynamic Series Build Threads Wed, 18 Nov 2009 19:16:26 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-series-build-t57.htm#621 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-series-build-t57.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-cc-build-t23.htm ripcard I think I'm getting the hang of this SketchUp thing. Here's what I hope is the definitive version that I will build soon. If anyone has Sketchup and would like the model files for a 3D walk around of the speaker let me know. These 2D files do give you a good idea though. [img][/img] The x-ray view is great for seeing how the pieces fit together. [img][/img] [img][/img] [img][/img] Now I'm going to see if I can come up with a DIY stand/rack that will support ... Dynamic Series Build Threads Sun, 08 Feb 2009 21:13:23 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-cc-build-t23.htm#222 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-cc-build-t23.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-mod-build-t53.htm ripcard To go along with my 2Ts built last winter and my 2CC that is currently being built, I have started on the 1S speakers to round out my HT. I will be building these at the same time as the centre. As per usual, I've made a few changes to the design. In the case of the 1S, these changes are minor when compared to the centre and mains. I will rear port them and build the front baffle to the same design as the 2T and 2CC (with a roundover and truncated at the bottom to allow some veneer on the ... Dynamic Series Build Threads Tue, 27 Oct 2009 14:27:24 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-mod-build-t53.htm#593 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-mod-build-t53.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-minitower-build-t49.htm MJ Hi. First up can I add my compliments (to that of everyone else's) to Jed for his customer service. Jed has developed for me a custom cabinet design to suit my proposed HT. I wanted to use the 1S for surrounds but wanted the cabinet 'flat' so it could sit against, or in, the wall. Jed has done a crossover to suit on-wall placement, which is now mentioned on his website. So Jed redesigned the 1S for me. You can get an idea of its dimensions from the pictures. (It's about 42" tall). ... Dynamic Series Build Threads Fri, 11 Sep 2009 03:01:18 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-minitower-build-t49.htm#522 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/1s-minitower-build-t49.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-1s-kit-build-t6.htm Admin Alright. I've been rather cautious with my approach for the 1s. I want it to be absolutely perfect for a variety of different people. It will now be in a PE curved MTM cabinet. DIY cabinet builders can build a square box version as long as the front baffle layout is the same. There will be a PVC pipe insert to separate the mid chamber from the woofer section of the box. More to come this weekend. This may very well be my best seller because it'll have the sound of the rest of the Dynamic ... Dynamic Series Build Threads Wed, 03 Dec 2008 03:15:38 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-1s-kit-build-t6.htm#47 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-1s-kit-build-t6.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4cc4t1s-build-t52.htm Fast Cars Hi Jed, finally started my build for the dynamic series speakers. I have most of the MDF cut for all the speakers, I have a question about the speaker binding plates. Your diagrams do not show where these should be and there are no photo's of the rear of the finished speakers (4CC,4T,1S). Do I cut a hole completely out for the speaker binding plate or is a recess cut into the MDF and small holes drilled out for the wire to pass thru to the cabinet? The other question I have is; for the speaker ... Dynamic Series Build Threads Mon, 19 Oct 2009 15:40:03 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4cc4t1s-build-t52.htm#587 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4cc4t1s-build-t52.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4cc-with-mods-t51.htm Bohnzy I really like your design but I'm a fan of ribbons for the top end. So...what would be the fee to design this configuration using the Zaph's, the current Tang's and a Fountek NeoCD2.0 true ribbon? My goal is a center speaker worthy of carrying the 80% of the HD sound to fill a 35x30 theater, (my screen is 70" x 124") that won't mush out with higher volumes and can shine with Led Zep/Rush and stand with Grand Funk/Montrose but not peak out for Iron Man and Hulk. I'm running the ... Dynamic Series Build Threads Thu, 08 Oct 2009 23:38:35 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4cc-with-mods-t51.htm#556 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4cc-with-mods-t51.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/re-dynamic-series-shipped-overseas-t29.htm Masuta
I have tried to send you an email but I don't think they are getting through.

I was wondering if you ship internationally as I am in Australia?

I am after a set (possibly 2) of dynamic speakers (4T, 4CC and 2 pairs of 1S's to make a 7.1 set)

Thanks,
Masuta.]]> Dynamic Series Build Threads Wed, 11 Mar 2009 00:43:41 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/re-dynamic-series-shipped-overseas-t29.htm#292 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/re-dynamic-series-shipped-overseas-t29.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4t-build-question-t37.htm Fast Cars Hi Jed, I have a question about the 4T layout. It concerns the internal solid brace that is the back of the Midrange and Tweeter section. On the drawing it shows that the vertical solid brace is situated 7 1/4 inches from the back panel of the speaker. Horizontial brace Type A has a cutout opening to the rear chamber. As per the drawing this would place the solid internal brace (rear of midrange & tweeter section) over top of the brace Type A opening by an 1 inch. Should I move the solid ... Dynamic Series Build Threads Fri, 26 Jun 2009 16:23:42 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4t-build-question-t37.htm#442 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/4t-build-question-t37.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/doug-and-josh-s-2t-w-sub-2cc-and-d4-build-t22.htm jjminch I figured it would be easier to start a build thread, rather than keep up the constant emails with Jed. We are doing a modified version of the 2T, it has a side firing 10" Dayton RF sub in it. The 2CC and Lineup D4 are left unchanged. I say "we" as I'm not doing any building. My dad is doing all the work, about 3,000 miles away from me right now. Dynamic Series Build Threads Sat, 07 Feb 2009 17:14:42 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/doug-and-josh-s-2t-w-sub-2cc-and-d4-build-t22.htm#210 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/doug-and-josh-s-2t-w-sub-2cc-and-d4-build-t22.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/sal-s-dynamic-series-4t-and-4cc-t19.htm aqus If interested you can follow the progress here:
http://www.htguide.com/forum/showthread.php4?t=32582]]> Dynamic Series Build Threads Fri, 30 Jan 2009 00:59:06 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/sal-s-dynamic-series-4t-and-4cc-t19.htm#160 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/sal-s-dynamic-series-4t-and-4cc-t19.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/power-handling-and-efficiency-for-the-dynamic-series-t24.htm op-center
Any idea what kind of efficiency the 4T and 4CC might have?]]> Dynamic Series Build Threads Fri, 13 Feb 2009 22:20:29 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/power-handling-and-efficiency-for-the-dynamic-series-t24.htm#240 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/power-handling-and-efficiency-for-the-dynamic-series-t24.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-t-build-t8.htm ripcard A little while ago I contacted Jed about building a slightlhy smaller version of his Dynamic 2 T towers. He drew up a box design and modeled the response. Jed's comments after testing: "FR in room with a large gate, so reflections take part below 300hz. The small dip at 200hz is a room side wall reflection, and will not really be there in most situations etc. But still, it is amazingly flat from 200hz up to 20k!" I decided to go ahead and attempt the build. ... Dynamic Series Build Threads Tue, 25 Nov 2008 15:13:06 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-t-build-t8.htm#29 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/mod-2-t-build-t8.htm http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4t-custom-curved-cabinet-build-t10.htm Doug Ok so I kind of went through all of this on 3 different forums now But I figured I'd be nice and post it in Jed's forum as he is the designer. I may not go into quite as much detail as I did before but I'll try. For starters let's talk about the design a bit. With mine I wanted to maximize low end output so I opted for a larger cabinet then what Jed originally designed. Also I had known since the last speaker I built that I wanted to do a curved cabinet. So I started working up a cabinet ... Dynamic Series Build Threads Wed, 03 Dec 2008 05:32:53 GMT http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4t-custom-curved-cabinet-build-t10.htm#48 http://clearwave.forumotion.net/dynamic-series-build-threads-f3/dynamic-4t-custom-curved-cabinet-build-t10.htm