Power handling and efficiency for the dynamic series
Page 1 of 1 • Share •
Power handling and efficiency for the dynamic series
This is probably on the site somewhere but I can't find it. What kind of power should be provided for the dynamic series? The emotiva xpa-5 is looking really good (200x5) but is this too much given the 5 ohm areas I see on the specification page?
Any idea what kind of efficiency the 4T and 4CC might have?
Any idea what kind of efficiency the 4T and 4CC might have?
op-center- Posts: 1
Join date: 2009-02-13
Re: Power handling and efficiency for the dynamic series
The 4T have the capability to play at deafening levels. Over 115dbs. Power handling is roughly 360watts. Sensitivity is around 88-89dbs 1 watt/meter. They are 8 ohm speakers.
These specs say a lot about the Dynamic Series "dynamic" capabilities, and I can't imagine anyone bottoming out these speakers and still have the ability to hear afterwards (in a normal listening room/HT). They have the reserve to play as loud as you want, but they are really more about sound quality than PA concert SPL.
These specs say a lot about the Dynamic Series "dynamic" capabilities, and I can't imagine anyone bottoming out these speakers and still have the ability to hear afterwards (in a normal listening room/HT). They have the reserve to play as loud as you want, but they are really more about sound quality than PA concert SPL.

Clearwave- Posts: 303
Join date: 2008-11-30
Permissions of this forum:
You cannot reply to topics in this forum





